Computeruser.com
Latest News

Recover files from IDE Hard Drive recover,IDE hard drive Data Recovery

IDE (Integrated Drive Electronics) is a standard electronic interface used between a computer motherboard's data paths or bus and the computer's disk storage devices. The IDE interface is based on the IBM PC Industry Standard Architecture (ISA) 16-bit bus standard, but it is also used in computers that use other bus standards. Most computers sold today use an enhanced version of IDE called Enhanced Integrated Drive Electronics (EIDE). In today's computers, the IDE controller is often built into the motherboard.

IDE was adopted as a standard by American National Standards Institute (ANSI) in November, 1990. The ANSI name for IDE is Advanced Technology Attachment (ATA). The IDE (ATA) standard is one of several related standards maintained by the T10 Committee.

What is ATA hard drive

Parallel ATA technology is an IDE (Integrated Device Electronics) specification. Initially, the IDE is only an attempt to put the controller with integrated disk volume as the primary intent of the hard drive interface technology. As IDE/EIDE get increasingly wide range of applications, the global standardization Protocol is used since the inception of the technical specifications standards in terms of global hard drive on ATA (Advanced Technology Attachment).

Diskgetor data recovery software can recover lost files due to deletion, format, raw partition, virus attack, system crash etc. from IDE Hard Disk, external hard drive, hardware RAID, hard drive, USB drive, SD card, memory card, etc.

The IDE's full name in English as "Integrated Drive Electronics" as"electronic integrated driv" , is now widely used on the external interface, add hard drives and optical drives. Using 16-bit data parallel transfer mode, the volume is small, fast data transfer. One IDE interface can only received two external device. which purported to mean "the hard disk controller" and the "up" integrated with the hard drive. Integrated Device Electronics. It is the most widely-used hard drive interface on the market. The fancy name refers to how the IDE technology "integrates" the electronics controller into the drive itself.

IDE (Integrated Drive Electronics) is a standard electronic interface used between a computer motherboard's data paths or bus and the computer's disk storage devices. The IDE interface is based on the IBM PC Industry Standard Architecture (ISA) 16-bit bus standard, but it is also used in computers that use other bus standards. Most computers sold today use an enhanced version of IDE called Enhanced Integrated Drive Electronics (EIDE). In today's computers, the IDE controller is often built into the motherboard.

IDE was adopted as a standard by American National Standards Institute (ANSI) in November, 1990. The ANSI name for IDE is Advanced Technology Attachment (ATA). The IDE (ATA) standard is one of several related standards maintained by the T10 Committee.

Parallel ATA technology is an IDE (Integrated Device Electronics) specification. Initially, the IDE is only an attempt to put the controller with integrated disk volume as the primary intent of the hard drive interface technology. As IDE/EIDE get increasingly wide range of applications, the global standardization Protocol is used since the inception of the technical specifications standards in terms of global hard drive on ATA (Advanced Technology Attachment).

Diskgetor data recovery software can recover lost files due to deletion, format, raw partition, virus attack, system crash etc. from IDE Hard Disk, external hard drive, hardware RAID, hard drive, USB drive, SD card, memory card, etc.

More info: http://www.diskgetor.com/ide-hard-drive-data-recovery.htm

Leave a comment

seks shop - izolasyon
basic theory test book basic theory test