Computeruser.com
Latest News

Sumida SMD Automotive Power Inductors Handle High Temps, High Currents

Northvale, NJ, December 25, 2020 –(PR.com)– New Yorker Electronics has announced the release of a new line of Sumida Inductors, designed for temperature, high current, high-insulation voltage and magnetic shielding. The new line of Sumida CDEP13D**/T150 power inductors continue the expansion of its AEC-Q200 qualified SMD inductors, as the new products are an outgrowth of the CDEP15D**/T150 line.

Consisting of ten standard types and ten high-power types, the new devices offer a combination of four key benefits, when compared to many other inductors. These are high temperature, high current, high insulation voltage and magnetic shielding.

Inductance values range from 0.8 to 22µH, with saturation current of up to 32 amps. It measures 13.5 x 13.5 x 10 mm, as compared to the 2mm larger CDEP15D**/T150 line, which offers saturation current of up to 50.4µH. For durability, core and windings withstand a voltage of up to 120Vdc.

The full operating temperature range is -40°C to 150°C (including coil’s self-temperature rise) and both product families are qualified to the Automotive AEC-Q200 reliability test requirements. The 150°C temperature satisfies most under-hood automotive application requirements, while the Mn-Zn (Manganese-Zinc) ferrite core has high-magnetic permeability and low power losses at the higher switching frequencies now found in automotive power circuits. High-frequency performance is further enhanced by the application of flat coil windings, which counteract “skin-effect,” and lower DC resistance. Flat-coil windings are also much more space-efficient than round-wire coils, helping to significantly reduce device size.

The part geometry provides very effective magnetic shielding, which is of growing importance due to the push towards smaller, more densely-packed automotive circuits. Unchecked, radiated EMI/RFI can also affect the operation of other circuits nearby.

Popular automotive applications for these inductors include LED Headlight Driver Modules, Adaptive Driving Beam (ADB), Adaptive LED Boards, Daylight Running Light (DRL) systems, Pulse Width Dimming (PWD) circuits, AFS (Adaptive Front-lighting System), Hybrid Engine Controls, Powertrain Control Modules (PCM) or any high-reliability application that must tolerate a wide temperature range.

A as a franchise distributor of Sumida, New Yorker Electronics supplies all products from automotive keyless antennas to green energy solutions, will be available for supply by New Yorker Electronics.

New Yorker Electronics is a certified franchised distributor of electronic components, well known for its full product lines, large inventories and competitive pricing since 1948. It is an AS9120B and ISO 9001:2015 certified source of passive components, discrete semiconductors, electromechanical devices, Flash & DRAM modules, embedded board solutions, power supplies and connectors, and operates exclusively at heightened military and aerospace performance levels. New Yorker Electronics operates in strict accordance with AS5553 and AS6496 standards in its everyday procedures to thwart the proliferation of counterfeit parts. It is a member of ECIA (Electronics Component Industry Association) and of ERAI (Electronic Resellers Association International).

Contact Information:
New Yorker Electronics
Mark Pappas
201-750-1171
Contact via Email
www.newyorkerelectronics.com
209 Industrial Avenue
Northvale, New Jersey 07647
USA

Read the full story here: https://www.pr.com/press-release/827907

Press Release Distributed by PR.com

Leave a comment

seks shop - izolasyon
basic theory test book basic theory test